• Contact Us: +86 18657466579
  • sales@icseekers.com
  • LM358 Dual Op-Amp Introduction: Pinout and Function, Sample Guide

    2/26/2026 7:16:02 PM

    What is LM358

    The LM358 (such as LM358DR) is an industry-standard dual operational amplifier designed for cost-sensitive and low-power analog applications. It integrates two independent, internally compensated op amps in a single package and is optimized for single-supply operation, while also supporting split supplies when required.

    One of the defining characteristics of the LM358 is its input common-mode range that includes ground, allowing it to sense signals close to 0 V without additional biasing. Combined with low quiescent current and wide supply voltage support, the LM358 has become a long-lifecycle solution widely used in consumer, industrial, and automotive electronics.

    Features

    The LM358 offers a practical balance between performance, robustness, and simplicity:
    • Dual operational amplifier in one package
    • Wide supply voltage range (typically 3 V to 36 V)
    • Low quiescent current, suitable for power-sensitive designs
    • Input common-mode voltage range includes ground
    • Internally frequency compensated for unity-gain stability
    • Low input offset voltage (improved in B / BA versions)
    • High differential input voltage capability
    • Built-in RF and EMI filtering (newer versions)
    • Available in multiple packages (SOIC, TSSOP, PDIP, SOT-23)
    These features make the LM358 a reliable general-purpose analog building block.

    LM358 pinout and pin function

    LM358 pinout

    NAME Pin No I/O DESCRIPTION
    IN1− 2 I Negative input
    IN1+ 3 I Positive input
    IN2− 6 I Negative input
    IN2+ 5 I Positive input
    OUT1 1 O Output
    OUT2 7 O Output
    V− 4 — Negative (lowest) supply or ground (for single-supply operation)
    NC — — No internal connection
    V+ 8 — Positive (highest) supply


    LM358 Specifications

    Parameter Value
    Number of channels 2
    Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 30
    Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3
    Rail-to-rail In to V-
    GBW (typ) (MHz) 0.7
    Slew rate (typ) (V/µs) 0.3
    Vos (offset voltage at 25°C) (max) (mV) 7
    Iq per channel (typ) (mA) 0.35
    Vn at 1 kHz (typ)(nV√Hz) 40
    Operating temperature range (°C) 0 to 70
    Offset drift (typ)  (µV/°C) 7
    Features Standard Amps
    Input bias current (max) (pA) 150000
    CMRR (typ) (dB) 80
    Iout (typ) (A) 0.03
    Architecture Bipolar
    Input common mode headroom (to negative supply) (typ) (V) 0
    Input common mode headroom (to positive supply) (typ) (V) -1.5
    Output swing headroom (to negative supply) (typ) (V) 0.005
    Output swing headroom (to positive supply) (typ) (V) -2


    LM358 Functional Block Diagram

    LM358 Functional Block Diagram



    How to Use the LM358

    LM358 IC (Dual comparator) Basic Electronics


    LM358 Op-Amp Introduction

    Replacement Model

    Depending on performance, power, and availability requirements, the following devices can be used as direct or near-direct replacements for the LM358:
    LM2904 / LM2904B
    Automotive-grade equivalents of the LM358, designed for wider temperature ranges and harsher environments.
    LM258
    Similar electrical characteristics but intended for different temperature ranges and qualification levels.
    CMOS Alternatives (TLC358, LMC358)
    Offer significantly lower power consumption and improved output swing, suitable for battery-powered systems.
     Note: While many replacements are pin-compatible, designers should always verify offset voltage, output swing, and temperature ratings.

    Application

    The LM358 is widely used across multiple industries due to its versatility and low cost:
    • Sensor signal conditioning (temperature, current, voltage sensing)
    • Power supply monitoring and feedback circuits
    • Battery-powered and portable electronics
    • Motor control and speed feedback circuits
    • Consumer appliances and chargers
    • Industrial control and automation systems
    • Audio pre-amplification (low-frequency, non-hi-fi)
    • Educational and prototyping projects
    Its long production history and stable specifications make it especially attractive for mass production and long-lifecycle products.


    Copyright © 2025 Xinhou Future Technology Co., Limited

    Home

    Home

    Product

    Product

    Phone

    Phone

    About Us

    About Us