• Contact Us: +86 18657466579
  • sales@icseekers.com
  • TDK InvenSense ICM-42605 6‑axis MEMS motion Sensor Quick Learning

    1/22/2026 6:40:01 PM

    Model Overview

    ICM-42605

    The TDK InvenSense ICM-42605 is a low-power, high-performance 6-axis MEMS motion tracking sensor that integrates a 3-axis gyroscope and a 3-axis accelerometer into a compact 14-pin LGA package (2.5 × 3.0 × 0.91 mm).
    Designed for modern motion-aware applications, the ICM-42605 combines excellent noise performance, flexible full-scale ranges, and advanced embedded features such as FIFO buffering and motion detection functions. Its high level of integration helps designers reduce BOM cost and simplify system-level design, making it ideal for both consumer and industrial applications.


    ICM-42605 Key Features

    The ICM-42605 offers a strong balance between performance, power efficiency, and integration:
    • 6-axis IMU: 3-axis gyroscope + 3-axis accelerometer
    • Gyroscope full-scale range: ±15.625 dps to ±2000 dps
    • Accelerometer full-scale range: ±2 g to ±16 g
    • Low-power operation with typical 6-axis current consumption of 0.65 mA
    • 2 KB FIFO buffer to reduce host processor load
    • Multiple digital interfaces: I3C℠, I²C, and SPI
    • Integrated digital temperature sensor
    • Programmable digital filters and interrupts
    • Advanced APEX™ motion functions (pedometer, tap detection, wake on motion, tilt detection)
    • Wide operating voltage range (VDD and VDDIO from 1.71 V to 3.6 V)
    • High shock resistance up to 20,000 g

    These features make the ICM-42605 well suited for always-on motion sensing in power-constrained systems.

    ICM-42605 Pinout and Pin Functions

    The ICM-42605 is available in a 14-pin LGA package. Key pin groups include:

    ICM-42605 Pinout and Pin Functions

    Pin Functions

    Pin Number Pin Name Pin Description
    1 AP_SDO / AP_AD0 AP_SDO: AP SPI serial data output (4-wire mode); AP_AD0: AP I3C℠ / I²C slave address LSB
    2 RESV No Connect or Connect to GND
    3 RESV No Connect or Connect to GND
    4 INT1 / INT INT1: Interrupt 1 (Note: INT1 can be push-pull or open drain); INT: All interrupts mapped to pin 4
    5 VDDIO IO power supply voltage
    6 GND Power supply ground
    7 RESV Connect to GND
    8 VDD Power supply voltage
    9 INT2 / FSYNC INT2: Interrupt 2 (Note: INT2 can be push-pull or open drain); FSYNC: Frame sync input; Connect to GND if FSYNC not used
    10 RESV No Connect or Connect to GND
    11 RESV No Connect or Connect to GND
    12 AP_CS AP SPI Chip select (AP SPI interface); Connect to VDDIO if using AP I3C℠ / I²C interface
    13 AP_SCL / AP_SCLK AP_SCL: AP I3C℠ / I²C serial clock; AP_SCLK: AP SPI serial clock
    14 AP_SDA / AP_SDIO / AP_SDI AP_SDA: AP I3C℠ / I²C serial data; AP_SDIO: AP SPI serial data I/O (3-wire mode); AP_SDI: AP SPI serial data input (4-wire mode)


    ICM-42605 Specification

    Product Attribute Attribute Value
    Manufacturer: TDK
    Product Category: IMUs - Inertial Measurement Units
    RoHS: Yes
    Mounting Style: SMD/SMT
    Package/Case: LGA-14
    Sensor Type: 6-axis
    Interface Type: I2C, SPI
    Output Type: Digital
    Acceleration: 2 g, 4 g, 8 g, 16 g
    Resolution: 16 bit
    Sensitivity: 2097.2 deg/s/LSB
    Minimum Operating Temperature: - 40 C
    Maximum Operating Temperature: + 85 C
    Supply Voltage - Min: 1.71 V
    Supply Voltage - Max: 3.6 V
    Operating Supply Current: 650 uA
    Sensing Axis: X, Y, Z



    ICM-42605 Typical operating circuit


    ICM-42605 Application Schematic (I3CSM / I 2C Interface to Host)



    Arduino Data

    ICM42605 combo accel gyro


    ICM42605 Arduino library


    Copyright © 2025 Xinhou Future Technology Co., Limited

    Home

    Home

    Product

    Product

    Phone

    Phone

    About Us

    About Us